Outdoor FTTX Field Waterproof Fiber Cable Enclosure IP67 Used For FTTA Or Splitter Inside

FTTX Enclosure is a new economic fiber distributed solution for outdoor use. Compare traditional products, FTTX Enclosure is easy to operate and has high compatibility. It can be used for wall-mounting, aerial installation or holding pole installation, based on different situation.FTTX Enclosure not only used in FTTH field, but also used in FTTA or other harsh environment.

FTTX Enclosure Application :

Traditional solution use ONU or FDH (Optical Network Unit/Fiber Distribution Hub), when trunk optical cable arrives to outside of mansions and villas. FTTX Enclosure can replace ONU or FDH because it has fiber distribution function. Inside, it can be fixed 2-4pcs 1*8 or 1*16 PLC, and can be put 24pcs fiber splice protection sleeves. After mating with 1-48F IP67 pre-assembled waterproof connector, FTTX Enclosure can connect each mansion and villa or low voltage silo directly. It can be fixed outside of mansions and villas, or holding pole installation. FTTX Enclosure can reduce signal loss through less connecting node. For in factory pre-assembled FTTX Enclosure, it’s no need high skill operator because of no fiber splice operation. Installation efficiency can be increased by 40%.

Traditionally, Remote Radio Unit (RRU) and Building Base band Unit (BBU) connected by optical fiber cable, formed star network topology. Each RRU need one duplex outdoor cable link to BBU. Installation will need more time and cost will be high.FTTX Enclosure work as an Aggregation/Demark box, link RRU and BBU together. From BBU to FTTX Enclosure, only need one multi-fiber hybrid cable. Then FTTX Enclosure divide fibers to each RRU through IP67 pre-assembled waterproof cable assemblies. RRU can get power through assembled power connector on FTTX Enclosure.It can avoid needless duplication.

Trunk cable needs to be fusion welded frequently because of each drum cable length limited. So connecting point is weak and need to be protected very well. When trunk cable comes into FTTX Enclosure, it will be sealed and fixed by torsion proof cable gland (plastic or metal type). For 5mm-14mm out diameter cable,FTTX Enclosure has different accessories to fit. Torsion gland can release stress when trunk cable bending and protect fiber avoid breaking. Inside of the FTTX Enclosure, main cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term. Splice protection sleeve (Max. 24pcs) and PLC (Max.2pcs) can be fixed on the body, which make FTTX Enclosure fiber divided very easy. Anti-skid design on the base case, which makes sure FTTX Enclosure holds wire/pole firmly.

The cable will be replayed frequently, when prospecting or military communication. Normal connector and cable cannot stand frequently and high strength pulling and reuse. Inside of the FTTX Enclosure, armored cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term. It’s very suitable for field use, especially in star network communications. High strength material and arc interface design make sure FTTX Enclosure work abnormally when suffer shocks.

Features and Benefits:

*High compatibility: can be assembled ODVA, Hconn (OptiTap compatible), Mini SC, ODC, PTLC, PTMPO or power adapter.
*Factory-sealed or field assembly.
*Strong enough: working under 1200N pulling force long term.
*From 2 to 12 ports for single or multi-fiber harsh connectors.
*Available with PLC or splice sleeve for fiber divide .
*IP68 waterproof rating.
*Wall-mounting, aerial installation or holding pole installation.
* Decreased angle surface and height make sure no connector interfering when operating.
*Meet IEC 61753-1 standard.
*Cost effective: save 40% operating time.

Specification:

Contact us

We are a high-tech enterprise focusing on the research, development and manufacturing of fibre optic patch cords, dedicated to providing high-quality fibre optic connectivity solutions for the global telecommunication infrastructure. Our core products are compatible with Ericsson, Nokia, Huawei, ZTE and other internationally renowned brands, and are widely used in the field of telecom network construction and maintenance.

As the preferred partner of telecom contractors, we not only provide high-quality fibre optic patch cord products, but also expand the design and manufacturing services of RF Jumper, grounding kits, AISG RET cable, power cords and other related products according to customers' needs. In addition, we can also provide customers with original accessories (such as connectors, panels, etc.) procurement support, to ensure that customers can obtain the required high-quality products and services in one-stop.

With excellent product performance, flexible customisation capabilities and efficient supply chain management, we have become a trusted long-term partner for many telecom contractors. In the future, we will continue to be driven by technological innovation to provide our customers with more efficient and reliable connectivity solutions to help the construction and development of global communications networks.

Core Advantages

Strong compatibility: products are fully compatible with Ericsson, Nokia, Huawei, ZTE and other mainstream equipment.

One-stop service: from fibre optic patch cords to related accessories, to meet the diversified needs of customers.

High-quality manufacturing: Strictly follow international standards to ensure product performance and reliability.

Customer-oriented: Provide customised solutions and technical support to help customers succeed.

Welcome to contact us, lets team together, create a new bright future.